Reindeer names sign with antlers SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
A sign in one piece: a rounded plaque with a pair of antlers rising from its top edge, the eight names cut through it in two columns, the closed letters bridged. Cut 300 mm wide in plywood or acrylic, the plaque is 162 mm deep and the letters are 17 mm tall.
What is in the file
| Size | 100 × 80 mm (3.94 × 3.17 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 48: 1 outer edge and 47 cut-outs |
| Cut length | 1,796 mm at this size |
| Narrowest part | 1.3 mm at this size |
| Nodes | 813 curve and line segments |
Measured from the file. PNG: 2,000 × 1,623 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.8 in (25 × 20 mm) | 0.33 mm | 456 mm | 120 | Too fine for most machines |
| 2 × 1.61 in (51 × 41 mm) | 0.66 mm | 912 mm | 30 | Fine detail: vinyl and paper only, weed with care |
| 3 × 2.41 in (76 × 61 mm) | 0.99 mm | 1,369 mm | 12 | Fine detail: vinyl and paper only, weed with care |
| 4 × 3.22 in (102 × 82 mm) | 1.3 mm | 1,825 mm | 6 | Vinyl, card and thin sheet |
| 6 × 4.82 in (152 × 123 mm) | 2 mm | 2,737 mm | 2 | Vinyl, card and thin sheet |
| 8 × 6.43 in (203 × 163 mm) | 2.6 mm | 3,649 mm | 1 | Vinyl, card and thin sheet |
| 12 × 9.65 in (305 × 245 mm) | 4 mm | 5,474 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More reindeer names SVG files
-
Reindeer names Christmas tree Solid · 49 pieces -
Reindeer name plates, Dasher to Vixen Solid · 4 pieces -
Reindeer name plates, Comet to Blitzen Solid · 4 pieces -
Reindeer names in script Solid · 8 pieces -
Reindeer names as the call from the poem Solid · 89 pieces -
Reindeer names stencil plate Solid · one piece -
Reindeer names in an outline frame Outline · 48 pieces -
Layered reindeer names sign, tall Layered · 48 pieces
← Reindeer names under a pair of antlers All 12 reindeer names designs Reindeer names Christmas tree →