Free Reel Cool Dad SVG

Reel Cool Dad in Alfa Slab One SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Reel Cool Dad in Alfa Slab One, as a solid black shape
Reel Cool Dad in Alfa Slab One. The preview is the SVG file itself.

“Reel Cool Dad” set in Alfa Slab One, a very heavy slab serif, on 2 centred lines. Thick strokes and blunt square serifs give it the weight of a poster headline.

What is in the file

Size100 × 41 mm (3.94 × 1.6 in), scales to any size
Pieces11 separate pieces
Outlines to cut19: 11 outer edges and 8 cut-outs
Cut length692 mm at this size
Narrowest part2 mm at this size
Nodes177 curve and line segments

Measured from the file. PNG: 2,000 × 860 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.41 in (25 × 10 mm)0.51 mm176 mm200Fine detail: vinyl and paper only, weed with care
2 × 0.81 in (51 × 21 mm)1 mm352 mm60Vinyl, card and thin sheet
3 × 1.22 in (76 × 31 mm)1.5 mm527 mm24Vinyl, card and thin sheet
4 × 1.63 in (102 × 41 mm)2 mm703 mm12Vinyl, card and thin sheet
6 × 2.44 in (152 × 62 mm)3 mm1,055 mm4Any material, including 3 mm wood and acrylic
8 × 3.26 in (203 × 83 mm)4.1 mm1,406 mm3Any material, including 3 mm wood and acrylic
12 × 4.88 in (305 × 124 mm)6.1 mm2,109 mm2Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Reel Cool Dad SVG files

← Reel Cool Dad in Lilita One All 13 Reel Cool Dad designs Reel Cool Dad in Amatic SC →