Free Reel Cool Dad SVG

Reel Cool Dad with stars SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Reel Cool Dad with stars, as a solid black shape
Reel Cool Dad with stars. The preview is the SVG file itself.

“Reel Cool Dad” in Lobster with a row of three stars above the words and three below, the middle one larger. The stars are loose pieces, spaced to the width of the lettering.

What is in the file

Size100 × 94 mm (3.94 × 3.71 in), scales to any size
Pieces11 separate pieces
Outlines to cut17: 11 outer edges and 6 cut-outs
Cut length1,153 mm at this size
Narrowest part1.1 mm at this size
Nodes284 curve and line segments

Measured from the file. PNG: 2,000 × 1,888 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.94 in (25 × 24 mm)0.28 mm293 mm100Too fine for most machines
2 × 1.88 in (51 × 48 mm)0.56 mm586 mm25Fine detail: vinyl and paper only, weed with care
3 × 2.83 in (76 × 72 mm)0.84 mm879 mm12Fine detail: vinyl and paper only, weed with care
4 × 3.77 in (102 × 96 mm)1.1 mm1,171 mm6Vinyl, card and thin sheet
6 × 5.65 in (152 × 144 mm)1.7 mm1,757 mm2Vinyl, card and thin sheet
8 × 7.54 in (203 × 191 mm)2.2 mm2,343 mm1Vinyl, card and thin sheet
12 × 11.3 in (305 × 287 mm)3.4 mm3,514 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Reel Cool Dad SVG files

← Reel Cool Dad in script and capitals All 13 Reel Cool Dad designs Reel Cool Dad outline lettering →