Free Reel Cool Dad SVG

Reel Cool Dad outline lettering SVG

Reel Cool Dad outline lettering, drawn as a line — Reel Cool Dad outline lettering. The preview is the SVG file itself.

“Reel Cool Dad” as hollow letters in a chunky rounded face: each letter is drawn as a line round its own edge, with a second loop round any counter. For colouring pages, foil and pen work, or layered over the solid version in a second colour.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 45 mm (3.94 × 1.76 in), scales to any size
Pieces	15 separate pieces
Outlines to cut	35: 15 outer edges and 20 cut-outs
Cut length	1,161 mm at this size
Narrowest part	1.4 mm at this size
Nodes	314 curve and line segments

Measured from the file. PNG: 2,000 × 938 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.45 in (25 × 11 mm)	0.36 mm	295 mm	180	Too fine for most machines
2 × 0.9 in (51 × 23 mm)	0.71 mm	590 mm	55	Fine detail: vinyl and paper only, weed with care
3 × 1.34 in (76 × 34 mm)	1.1 mm	885 mm	21	Vinyl, card and thin sheet
4 × 1.79 in (102 × 46 mm)	1.4 mm	1,180 mm	12	Vinyl, card and thin sheet
6 × 2.69 in (152 × 68 mm)	2.1 mm	1,769 mm	4	Vinyl, card and thin sheet
8 × 3.58 in (203 × 91 mm)	2.8 mm	2,359 mm	3	Vinyl, card and thin sheet
12 × 5.38 in (305 × 137 mm)	4.3 mm	3,539 mm	2	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Reel Cool Dad SVG files

← Reel Cool Dad with stars All 12 Reel Cool Dad designs Reel Cool Dad stencil plate →