Free pumpkin SVG

Polka dot pumpkin SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Polka dot pumpkin, as a solid black shape
Polka dot pumpkin. The preview is the SVG file itself.

A pumpkin silhouette covered in round holes in place of ribs. Layer it over a second colour so the dots show through.

What is in the file

Size100 × 93 mm (3.94 × 3.66 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut24: 1 outer edge and 23 cut-outs
Cut length948 mm at this size
Narrowest part5.8 mm at this size
Nodes120 curve and line segments
SymmetryMirror

Measured from the file. PNG: 2,000 × 1,865 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.93 in (25 × 24 mm)1.5 mm241 mm100Vinyl, card and thin sheet
2 × 1.86 in (51 × 47 mm)2.9 mm482 mm25Vinyl, card and thin sheet
3 × 2.79 in (76 × 71 mm)4.4 mm722 mm12Any material, including 3 mm wood and acrylic
4 × 3.72 in (102 × 94 mm)5.9 mm963 mm6Any material, including 3 mm wood and acrylic
6 × 5.58 in (152 × 142 mm)8.8 mm1,445 mm2Any material, including 3 mm wood and acrylic
8 × 7.44 in (203 × 189 mm)12 mm1,926 mm1Any material, including 3 mm wood and acrylic
12 × 11.16 in (305 × 283 mm)18 mm2,890 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More pumpkin SVG files

← Jack-o-lantern outline All 23 pumpkins Pumpkin monogram frame →