Free pumpkin SVG

Jack-o-lantern outline SVG

Jack-o-lantern outline, drawn as a line — Jack-o-lantern outline. The preview is the SVG file itself.

A line drawing of a carved pumpkin with the eyes, nose and grin drawn as outlines too. The face parts are separate loops, so use it for drawing, foil and engraving rather than cutting.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 91 mm (3.94 × 3.57 in), scales to any size
Pieces	5 separate pieces
Outlines to cut	13: 5 outer edges and 8 cut-outs
Cut length	1,172 mm at this size
Narrowest part	1.6 mm at this size
Nodes	153 curve and line segments

Measured from the file. PNG: 2,000 × 1,823 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.91 in (25 × 23 mm)	0.41 mm	298 mm	110	Too fine for most machines
2 × 1.82 in (51 × 46 mm)	0.81 mm	595 mm	30	Fine detail: vinyl and paper only, weed with care
3 × 2.72 in (76 × 69 mm)	1.2 mm	893 mm	12	Vinyl, card and thin sheet
4 × 3.63 in (102 × 92 mm)	1.6 mm	1,191 mm	6	Vinyl, card and thin sheet
6 × 5.45 in (152 × 138 mm)	2.4 mm	1,786 mm	2	Vinyl, card and thin sheet
8 × 7.26 in (203 × 185 mm)	3.3 mm	2,382 mm	1	Any material, including 3 mm wood and acrylic
12 × 10.9 in (305 × 277 mm)	4.9 mm	3,572 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More pumpkin SVG files

← Simple pumpkin outline All 23 pumpkins Polka dot pumpkin →