Free pumpkin SVG

Pumpkin with two leaves SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Pumpkin with two leaves, as a solid black shape
Pumpkin with two leaves. The preview is the SVG file itself.

A squat pumpkin with a veined leaf lying either side of a straight stem. Symmetrical, so it folds or mirrors cleanly on a card.

What is in the file

Size100 × 71 mm (3.94 × 2.8 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut21: 1 outer edge and 20 cut-outs
Cut length1,231 mm at this size
Narrowest part1 mm at this size
Nodes244 curve and line segments
SymmetryMirror

Measured from the file. PNG: 2,000 × 1,442 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.71 in (25 × 18 mm)0.25 mm313 mm130Too fine for most machines
2 × 1.42 in (51 × 36 mm)0.51 mm625 mm35Fine detail: vinyl and paper only, weed with care
3 × 2.13 in (76 × 54 mm)0.76 mm938 mm15Fine detail: vinyl and paper only, weed with care
4 × 2.84 in (102 × 72 mm)1 mm1,251 mm8Vinyl, card and thin sheet
6 × 4.26 in (152 × 108 mm)1.5 mm1,876 mm2Vinyl, card and thin sheet
8 × 5.68 in (203 × 144 mm)2 mm2,501 mm2Vinyl, card and thin sheet
12 × 8.52 in (305 × 216 mm)3 mm3,752 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More pumpkin SVG files

← Pumpkin with vine and leaf All 23 pumpkins Jack-o-lantern with a toothy grin →