Free pumpkin SVG

Jack-o-lantern with a toothy grin SVG

Jack-o-lantern with a toothy grin, as a solid black shape
Jack-o-lantern with a toothy grin. The preview is the SVG file itself.

The carved pumpkin everyone draws: triangle eyes and nose and a wide grin with three square teeth. Back it with yellow or orange card to light it up.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size100 × 93 mm (3.94 × 3.66 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut7: 1 outer edge and 6 cut-outs
Cut length898 mm at this size
Narrowest part3.2 mm at this size
Nodes90 curve and line segments
SymmetryMirror

Measured from the file. PNG: 2,000 × 1,865 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.93 in (25 × 24 mm)0.81 mm228 mm100Fine detail: vinyl and paper only, weed with care
2 × 1.86 in (51 × 47 mm)1.6 mm456 mm25Vinyl, card and thin sheet
3 × 2.79 in (76 × 71 mm)2.4 mm684 mm12Vinyl, card and thin sheet
4 × 3.72 in (102 × 94 mm)3.3 mm912 mm6Any material, including 3 mm wood and acrylic
6 × 5.58 in (152 × 142 mm)4.9 mm1,369 mm2Any material, including 3 mm wood and acrylic
8 × 7.44 in (203 × 189 mm)6.5 mm1,825 mm1Any material, including 3 mm wood and acrylic
12 × 11.16 in (305 × 283 mm)9.8 mm2,737 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More pumpkin SVG files

← Pumpkin with two leaves All 23 pumpkins Happy jack-o-lantern →