Free Puerto Rico SVG

Puerto Rico with its name beneath SVG

Puerto Rico with its name beneath, as a solid black shape — Puerto Rico with its name beneath. The preview is the SVG file itself.

The solid shape of Puerto Rico with “PUERTO RICO” in narrow capitals under it. The letters of “Puerto Rico” are loose pieces, so use transfer tape to keep their spacing.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 44 mm (3.94 × 1.74 in), scales to any size
Pieces	13 separate pieces
Outlines to cut	18: 13 outer edges and 5 cut-outs
Cut length	705 mm at this size
Narrowest part	1.5 mm at this size
Nodes	353 curve and line segments

Measured from the file. PNG: 2,000 × 929 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.44 in (25 × 11 mm)	0.38 mm	179 mm	180	Too fine for most machines
2 × 0.89 in (51 × 23 mm)	0.76 mm	358 mm	55	Fine detail: vinyl and paper only, weed with care
3 × 1.33 in (76 × 34 mm)	1.1 mm	537 mm	21	Vinyl, card and thin sheet
4 × 1.77 in (102 × 45 mm)	1.5 mm	716 mm	12	Vinyl, card and thin sheet
6 × 2.66 in (152 × 68 mm)	2.3 mm	1,074 mm	4	Vinyl, card and thin sheet
8 × 3.54 in (203 × 90 mm)	3 mm	1,433 mm	3	Any material, including 3 mm wood and acrylic
12 × 5.32 in (305 × 135 mm)	4.6 mm	2,149 mm	2	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Puerto Rico SVG files

← Puerto Rico cut from a heart All 8 Puerto Rico designs Puerto Rico in stripes →