Free Puerto Rico SVG

Puerto Rico cut from a disc SVG

Puerto Rico cut from a disc, as a solid black shape
Puerto Rico cut from a disc. The preview is the SVG file itself.

A disc 100 mm across with the shape of Puerto Rico cut out of its middle. One piece: Puerto Rico shows in whatever is behind it, on a coaster, a hanging ornament or a round decal.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size100 × 100 mm (3.94 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut4: 1 outer edge and 3 cut-outs
Cut length471 mm at this size
Narrowest partNothing narrower than 6 mm at this size
Nodes186 curve and line segments

Measured from the file. PNG: 2,000 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 1 in (25 × 25 mm)Over 1.5 mm120 mm100Vinyl, card and thin sheet
2 × 2 in (51 × 51 mm)Over 3 mm239 mm25Any material, including 3 mm wood and acrylic
3 × 3 in (76 × 76 mm)Over 4.6 mm359 mm9Any material, including 3 mm wood and acrylic
4 × 4 in (102 × 102 mm)Over 6.1 mm479 mm4Any material, including 3 mm wood and acrylic
6 × 6 in (152 × 152 mm)Over 9.1 mm718 mm1Any material, including 3 mm wood and acrylic
8 × 8 in (203 × 203 mm)Over 12 mm957 mm1Any material, including 3 mm wood and acrylic
12 × 12 in (305 × 305 mm)Over 18 mm1,436 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Puerto Rico SVG files

← Puerto Rico outline All 8 Puerto Rico designs Puerto Rico cut from a square tile →