Free Puerto Rico SVG

Layered Puerto Rico on an octagon SVG

Layered Puerto Rico on an octagon, in layered colours
Layered Puerto Rico on an octagon. The preview is the SVG file itself.

Puerto Rico in two colours: an octagon 100 mm across its points, and the shape of Puerto Rico to lay on top of it. Cut each from its own colour of vinyl or card for a badge, a patch or the front of a card.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size100 × 100 mm (3.94 × 3.94 in), scales to any size
Pieces4 separate pieces
Outlines to cut4 outlines
Cut length486 mm at this size
Narrowest partNothing narrower than 6 mm at this size
Nodes166 curve and line segments
Layers2: octagon and puerto rico

Measured from the file. PNG: 2,000 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 1 in (25 × 25 mm)Over 1.5 mm123 mm100Vinyl, card and thin sheet
2 × 2 in (51 × 51 mm)Over 3 mm247 mm25Any material, including 3 mm wood and acrylic
3 × 3 in (76 × 76 mm)Over 4.6 mm370 mm9Any material, including 3 mm wood and acrylic
4 × 4 in (102 × 102 mm)Over 6.1 mm494 mm4Any material, including 3 mm wood and acrylic
6 × 6 in (152 × 152 mm)Over 9.1 mm741 mm1Any material, including 3 mm wood and acrylic
8 × 8 in (203 × 203 mm)Over 12 mm988 mm1Any material, including 3 mm wood and acrylic
12 × 12 in (305 × 305 mm)Over 18 mm1,481 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Puerto Rico SVG files

← Puerto Rico in stripes All 8 Puerto Rico designs Puerto Rico map silhouette →