Free Promoted to Grandma SVG

Promoted to Grandma in Lilita One SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Promoted to Grandma in Lilita One, as a solid black shape
Promoted to Grandma in Lilita One. The preview is the SVG file itself.

“Promoted to Grandma” set in Lilita One, a chunky rounded sans, on 2 centred lines. The strokes are thick and the corners soft, so it is the easiest version to cut small.

What is in the file

Size100 × 35 mm (3.94 × 1.37 in), scales to any size
Pieces17 separate pieces
Outlines to cut26: 17 outer edges and 9 cut-outs
Cut length797 mm at this size
Narrowest part2 mm at this size
Nodes301 curve and line segments

Measured from the file. PNG: 2,000 × 744 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.35 in (25 × 9 mm)0.51 mm202 mm220Fine detail: vinyl and paper only, weed with care
2 × 0.69 in (51 × 18 mm)1 mm405 mm65Vinyl, card and thin sheet
3 × 1.04 in (76 × 26 mm)1.5 mm607 mm27Vinyl, card and thin sheet
4 × 1.39 in (102 × 35 mm)2 mm810 mm14Vinyl, card and thin sheet
6 × 2.08 in (152 × 53 mm)3 mm1,215 mm5Any material, including 3 mm wood and acrylic
8 × 2.78 in (203 × 71 mm)4.1 mm1,620 mm4Any material, including 3 mm wood and acrylic
12 × 4.16 in (305 × 106 mm)6.1 mm2,429 mm2Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Promoted to Grandma SVG files

← Promoted to Grandma in Kaushan Script All 13 Promoted to Grandma designs Promoted to Grandma in Alfa Slab One →