Free Promoted to Grandma SVG

Promoted to Grandma with hearts SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Promoted to Grandma with hearts, as a solid black shape
Promoted to Grandma with hearts. The preview is the SVG file itself.

“Promoted to Grandma” in Lobster with a row of three hearts above the words and three below, the middle one larger. The hearts are loose pieces, spaced to the width of the lettering.

What is in the file

Size100 × 80 mm (3.94 × 3.15 in), scales to any size
Pieces13 separate pieces
Outlines to cut21: 13 outer edges and 8 cut-outs
Cut length1,209 mm at this size
Narrowest part0.8 mm at this size
Nodes413 curve and line segments

Measured from the file. PNG: 2,000 × 1,615 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.8 in (25 × 20 mm)0.2 mm307 mm120Too fine for most machines
2 × 1.6 in (51 × 41 mm)0.41 mm614 mm30Too fine for most machines
3 × 2.4 in (76 × 61 mm)0.61 mm921 mm12Fine detail: vinyl and paper only, weed with care
4 × 3.2 in (102 × 81 mm)0.81 mm1,228 mm6Fine detail: vinyl and paper only, weed with care
6 × 4.8 in (152 × 122 mm)1.2 mm1,843 mm2Vinyl, card and thin sheet
8 × 6.4 in (203 × 163 mm)1.6 mm2,457 mm1Vinyl, card and thin sheet
12 × 9.6 in (305 × 244 mm)2.4 mm3,685 mm1Vinyl, card and thin sheet

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Promoted to Grandma SVG files

← Promoted to Grandma in script and capitals All 13 Promoted to Grandma designs Promoted to Grandma outline lettering →