Free Promoted to Grandma SVG

Promoted to Grandma in Amatic SC SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Promoted to Grandma in Amatic SC, as a solid black shape
Promoted to Grandma in Amatic SC. The preview is the SVG file itself.

“Promoted to Grandma” set in Amatic SC, narrow hand-drawn capitals, on 2 centred lines. Tall, thin and slightly uneven, like lettering on a chalkboard; the strokes are thickened so they cut.

What is in the file

Size100 × 59 mm (3.94 × 2.32 in), scales to any size
Pieces17 separate pieces
Outlines to cut27: 17 outer edges and 10 cut-outs
Cut length1,547 mm at this size
Narrowest part1.4 mm at this size
Nodes551 curve and line segments

Measured from the file. PNG: 2,000 × 1,210 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.59 in (25 × 15 mm)0.36 mm393 mm150Too fine for most machines
2 × 1.18 in (51 × 30 mm)0.71 mm786 mm40Fine detail: vinyl and paper only, weed with care
3 × 1.77 in (76 × 45 mm)1.1 mm1,179 mm18Vinyl, card and thin sheet
4 × 2.36 in (102 × 60 mm)1.4 mm1,572 mm8Vinyl, card and thin sheet
6 × 3.53 in (152 × 90 mm)2.1 mm2,358 mm3Vinyl, card and thin sheet
8 × 4.71 in (203 × 120 mm)2.8 mm3,144 mm2Vinyl, card and thin sheet
12 × 7.07 in (305 × 180 mm)4.3 mm4,715 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Promoted to Grandma SVG files

← Promoted to Grandma in Alfa Slab One All 13 Promoted to Grandma designs Promoted to Grandma in block capitals →