Free Pride SVG

Pride stencil plate SVG

Pride stencil plate, as a solid black shape — Pride stencil plate. The preview is the SVG file itself.

A rounded plate with “PRIDE” cut through it in block capitals, every closed letter bridged so nothing drops out. One piece: tape it down and paint or spray through it.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 45 mm (3.94 × 1.76 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	6: 1 outer edge and 5 cut-outs
Cut length	834 mm at this size
Narrowest part	1.7 mm at this size
Nodes	82 curve and line segments

Measured from the file. PNG: 2,000 × 937 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.45 in (25 × 11 mm)	0.43 mm	212 mm	180	Too fine for most machines
2 × 0.89 in (51 × 23 mm)	0.86 mm	424 mm	55	Fine detail: vinyl and paper only, weed with care
3 × 1.34 in (76 × 34 mm)	1.3 mm	636 mm	21	Vinyl, card and thin sheet
4 × 1.79 in (102 × 45 mm)	1.7 mm	847 mm	12	Vinyl, card and thin sheet
6 × 2.68 in (152 × 68 mm)	2.6 mm	1,271 mm	4	Vinyl, card and thin sheet
8 × 3.58 in (203 × 91 mm)	3.5 mm	1,695 mm	3	Any material, including 3 mm wood and acrylic
12 × 5.36 in (305 × 136 mm)	5.2 mm	2,542 mm	2	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Pride SVG files

← Pride outline lettering All 12 Pride designs Pride with a drop shadow →