Free Pride SVG

Pride in Alfa Slab One SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Pride in Alfa Slab One, as a solid black shape
Pride in Alfa Slab One. The preview is the SVG file itself.

“Pride” set in Alfa Slab One, a very heavy slab serif. Thick strokes and blunt square serifs give it the weight of a poster headline.

What is in the file

Size100 × 28 mm (3.94 × 1.1 in), scales to any size
Pieces6 separate pieces
Outlines to cut9: 6 outer edges and 3 cut-outs
Cut length528 mm at this size
Narrowest part3.9 mm at this size
Nodes96 curve and line segments

Measured from the file. PNG: 2,000 × 615 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.28 in (25 × 7 mm)0.99 mm134 mm250Fine detail: vinyl and paper only, weed with care
2 × 0.56 in (51 × 14 mm)2 mm268 mm80Vinyl, card and thin sheet
3 × 0.84 in (76 × 21 mm)3 mm402 mm33Vinyl, card and thin sheet
4 × 1.12 in (102 × 28 mm)4 mm536 mm18Any material, including 3 mm wood and acrylic
6 × 1.68 in (152 × 43 mm)5.9 mm805 mm6Any material, including 3 mm wood and acrylic
8 × 2.24 in (203 × 57 mm)7.9 mm1,073 mm5Any material, including 3 mm wood and acrylic
12 × 3.36 in (305 × 85 mm)12 mm1,609 mm3Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Pride SVG files

← Pride in Lilita One All 13 Pride designs Pride in Amatic SC →