Free Pride SVG

Pride in Amatic SC SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Pride in Amatic SC, as a solid black shape
Pride in Amatic SC. The preview is the SVG file itself.

“Pride” set in Amatic SC, narrow hand-drawn capitals. Tall, thin and slightly uneven, like lettering on a chalkboard; the strokes are thickened so they cut.

What is in the file

Size100 × 56 mm (3.94 × 2.19 in), scales to any size
Pieces5 separate pieces
Outlines to cut8: 5 outer edges and 3 cut-outs
Cut length905 mm at this size
Narrowest part3.2 mm at this size
Nodes195 curve and line segments

Measured from the file. PNG: 2,000 × 1,146 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.56 in (25 × 14 mm)0.81 mm230 mm160Fine detail: vinyl and paper only, weed with care
2 × 1.11 in (51 × 28 mm)1.6 mm460 mm45Vinyl, card and thin sheet
3 × 1.67 in (76 × 42 mm)2.4 mm690 mm18Vinyl, card and thin sheet
4 × 2.22 in (102 × 56 mm)3.3 mm919 mm10Any material, including 3 mm wood and acrylic
6 × 3.34 in (152 × 85 mm)4.9 mm1,379 mm3Any material, including 3 mm wood and acrylic
8 × 4.45 in (203 × 113 mm)6.5 mm1,839 mm2Any material, including 3 mm wood and acrylic
12 × 6.67 in (305 × 169 mm)9.8 mm2,758 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Pride SVG files

← Pride in Alfa Slab One All 13 Pride designs Pride in block capitals →