Free popcorn box SVG

Fry box to match the popcorn box SVG

Fry box to match the popcorn box, as a solid black shape
Fry box to match the popcorn box. The preview is the SVG file itself.

A chip scoop: a low front with a dip in its rim, a tall arched back, two narrow sides and a glued base. Cut 205 mm wide, it is 55 by 22 mm at the base, 70 mm tall at the front and 96 mm at the back.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size100 × 64 mm (3.94 × 2.51 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut39: 1 outer edge and 38 cut-outs
Cut length550 mm at this size
Narrowest part1.9 mm at this size
Nodes187 curve and line segments

Measured from the file. PNG: 2,000 × 1,304 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.64 in (25 × 16 mm)0.48 mm140 mm140Too fine for most machines
2 × 1.28 in (51 × 32 mm)0.97 mm279 mm40Fine detail: vinyl and paper only, weed with care
3 × 1.91 in (76 × 49 mm)1.4 mm419 mm15Vinyl, card and thin sheet
4 × 2.55 in (102 × 65 mm)1.9 mm559 mm8Vinyl, card and thin sheet
6 × 3.83 in (152 × 97 mm)2.9 mm838 mm3Vinyl, card and thin sheet
8 × 5.1 in (203 × 130 mm)3.9 mm1,118 mm2Any material, including 3 mm wood and acrylic
12 × 7.66 in (305 × 194 mm)5.8 mm1,676 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More popcorn box SVG files

← Popcorn box cone with a scalloped rim All 10 popcorn boxes Two mini popcorn boxes on one sheet →