Free popcorn box SVG

Popcorn box cone with a scalloped rim SVG

Popcorn box cone with a scalloped rim, as a solid black shape
Popcorn box cone with a scalloped rim. The preview is the SVG file itself.

The quickest holder of all: a slice of a circle rolled into a cone and glued along one tab. Stand a set of them in glasses or a drilled board. Cut 240 mm wide, the cone is 151 mm long and 84 mm across its mouth.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size100 × 68 mm (3.94 × 2.69 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut11: 1 outer edge and 10 cut-outs
Cut length379 mm at this size
Narrowest part2.4 mm at this size
Nodes82 curve and line segments
Also found asPopcorn holder SVG

Measured from the file. PNG: 2,000 × 1,388 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.68 in (25 × 17 mm)0.61 mm96 mm130Fine detail: vinyl and paper only, weed with care
2 × 1.36 in (51 × 35 mm)1.2 mm193 mm35Vinyl, card and thin sheet
3 × 2.05 in (76 × 52 mm)1.8 mm289 mm15Vinyl, card and thin sheet
4 × 2.73 in (102 × 69 mm)2.4 mm385 mm8Vinyl, card and thin sheet
6 × 4.09 in (152 × 104 mm)3.7 mm578 mm2Any material, including 3 mm wood and acrylic
8 × 5.46 in (203 × 139 mm)4.9 mm770 mm2Any material, including 3 mm wood and acrylic
12 × 8.18 in (305 × 208 mm)7.3 mm1,155 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More popcorn box SVG files

← Round popcorn box bucket All 10 popcorn boxes Fry box to match the popcorn box →