Free pool SVG

Pool ladder in the water SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Pool ladder in the water, as a solid black shape
Pool ladder in the water. The preview is the SVG file itself.

A steel pool ladder from the front: two handrails that hook over at the top, three wide treads between them and a band of water with a flat underside round its foot.

What is in the file

Size96 × 100 mm (3.76 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut6: 1 outer edge and 5 cut-outs
Cut length882 mm at this size
Narrowest part3.2 mm at this size
Nodes178 curve and line segments

Measured from the file. PNG: 1,913 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.96 × 1 in (24 × 25 mm)0.81 mm224 mm100Fine detail: vinyl and paper only, weed with care
1.91 × 2 in (49 × 51 mm)1.6 mm448 mm25Vinyl, card and thin sheet
2.87 × 3 in (73 × 76 mm)2.4 mm672 mm9Vinyl, card and thin sheet
3.82 × 4 in (97 × 102 mm)3.3 mm896 mm6Any material, including 3 mm wood and acrylic
5.73 × 6 in (146 × 152 mm)4.9 mm1,344 mm2Any material, including 3 mm wood and acrylic
7.64 × 8 in (194 × 203 mm)6.5 mm1,792 mm1Any material, including 3 mm wood and acrylic
11.46 × 12 in (291 × 305 mm)9.8 mm2,688 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More pool SVG files

← Pool diving board All 14 pools Pool float duck ring →