Pool diving board SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
A springboard on its stand at the deep end: a plank that dips at the tip, a roller, two steps, a handrail with a middle bar, and a ring spreading on the water below it. Stands on the flat foot of the deck.
This shape is also a part in the shadow box scene maker, where you can stand it in a layered scene and download the sheets.
What is in the file
| Size | 100 × 46 mm (3.94 × 1.81 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 6: 1 outer edge and 5 cut-outs |
| Cut length | 601 mm at this size |
| Narrowest part | 4.3 mm at this size |
| Nodes | 109 curve and line segments |
Measured from the file. PNG: 2,000 × 960 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.46 in (25 × 12 mm) | 1.1 mm | 153 mm | 180 | Vinyl, card and thin sheet |
| 2 × 0.92 in (51 × 23 mm) | 2.2 mm | 305 mm | 50 | Vinyl, card and thin sheet |
| 3 × 1.38 in (76 × 35 mm) | 3.3 mm | 458 mm | 21 | Any material, including 3 mm wood and acrylic |
| 4 × 1.84 in (102 × 47 mm) | 4.4 mm | 611 mm | 10 | Any material, including 3 mm wood and acrylic |
| 6 × 2.75 in (152 × 70 mm) | 6.6 mm | 916 mm | 4 | Any material, including 3 mm wood and acrylic |
| 8 × 3.67 in (203 × 93 mm) | 8.7 mm | 1,221 mm | 3 | Any material, including 3 mm wood and acrylic |
| 12 × 5.51 in (305 × 140 mm) | 13 mm | 1,832 mm | 2 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More pool SVG files
-
Pool ladder in the water Solid · one piece -
Pool float duck ring Solid · one piece -
Pool water slide Solid · one piece -
Lifeguard chair by the pool Solid · one piece -
Poolside hot tub with steam Solid · one piece -
Pool beach ball Solid · one piece -
Pool splash with drops Solid · 8 pieces -
Pool sign with a blank middle Solid · one piece
← Above-ground pool with steps All 14 pools Pool ladder in the water →