Free polka dot SVG

Polka dot heart SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Polka dot heart, as a solid black shape
Polka dot heart. The preview is the SVG file itself.

A solid heart with staggered dots cut out of it and a plain rim left round the edge, which trims the outer dots. One piece: the colour underneath shows through as the dots.

What is in the file

Size100 × 90 mm (3.94 × 3.56 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut45: 1 outer edge and 44 cut-outs
Cut length1,229 mm at this size
Smallest dot3.7 mm at this size
Thinnest wall between cut-outs2.6 mm at this size
Nodes218 curve and line segments
SymmetryMirror

Measured from the file. PNG: 2,000 × 1,815 pixels, transparent. About the three file types.

How fine is it at your size?

Scaling a design scales its finest detail too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightSmallest dotCut lengthFit on a 12 in sheetRule of thumb
1 × 0.9 in (25 × 23 mm)0.94 mm312 mm110Fine detail: vinyl and paper only, weed with care
2 × 1.81 in (51 × 46 mm)1.9 mm624 mm30Vinyl, card and thin sheet
3 × 2.71 in (76 × 69 mm)2.8 mm936 mm12Vinyl, card and thin sheet
4 × 3.62 in (102 × 92 mm)3.8 mm1,249 mm6Any material, including 3 mm wood and acrylic
6 × 5.42 in (152 × 138 mm)5.6 mm1,873 mm2Any material, including 3 mm wood and acrylic
8 × 7.23 in (203 × 184 mm)7.5 mm2,497 mm1Any material, including 3 mm wood and acrylic
12 × 10.85 in (305 × 276 mm)11 mm3,746 mm1Any material, including 3 mm wood and acrylic

The smallest dot is the finest detail in the pattern. Below about half a millimetre it is too small to cut and may fill in when printed. How to open the file in Cricut, Silhouette and laser software.

More polka dot SVG files

← Falling confetti dots All 17 polka dots Circle with polka dots →