Free polka dot SVG

Polka dot stencil panel SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Polka dot stencil panel, as a solid black shape
Polka dot stencil panel. The preview is the SVG file itself.

A rounded square plate with 25 round holes in straight rows. One piece: paint through it as a stencil, or lay it over a second colour so the dots show through.

What is in the file

Size100 × 100 mm (3.94 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut26: 1 outer edge and 25 cut-outs
Cut length1,238 mm at this size
Smallest dotNothing narrower than 6 mm at this size
Nodes166 curve and line segments
Symmetry4-fold rotation and mirror

Measured from the file. PNG: 2,000 × 2,000 pixels, transparent. About the three file types.

How fine is it at your size?

Scaling a design scales its finest detail too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightSmallest dotCut lengthFit on a 12 in sheetRule of thumb
1 × 1 in (25 × 25 mm)Over 1.5 mm314 mm100Vinyl, card and thin sheet
2 × 2 in (51 × 51 mm)Over 3 mm629 mm25Any material, including 3 mm wood and acrylic
3 × 3 in (76 × 76 mm)Over 4.6 mm943 mm9Any material, including 3 mm wood and acrylic
4 × 4 in (102 × 102 mm)Over 6.1 mm1,258 mm4Any material, including 3 mm wood and acrylic
6 × 6 in (152 × 152 mm)Over 9.1 mm1,887 mm1Any material, including 3 mm wood and acrylic
8 × 8 in (203 × 203 mm)Over 12 mm2,516 mm1Any material, including 3 mm wood and acrylic
12 × 12 in (305 × 305 mm)Over 18 mm3,773 mm1Any material, including 3 mm wood and acrylic

The smallest dot is the finest detail in the pattern. Below about half a millimetre it is too small to cut and may fill in when printed. How to open the file in Cricut, Silhouette and laser software.

More polka dot SVG files

← Polka dot star All 17 polka dots Polka dot frame →