Free pizza SVG

Pizza on a wooden peel SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Pizza on a wooden peel, as a solid black shape
Pizza on a wooden peel. The preview is the SVG file itself.

A whole pizza sitting on the paddle that slides it out of the oven, with a hanging hole in the handle. A cut line with four bridges sets the pizza apart from the board.

What is in the file

Size68 × 100 mm (2.67 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut34: 1 outer edge and 33 cut-outs
Cut length1,450 mm at this size
Narrowest part1 mm at this size
Nodes248 curve and line segments

Measured from the file. PNG: 1,381 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.68 × 1 in (17 × 25 mm)0.25 mm368 mm130Too fine for most machines
1.36 × 2 in (34 × 51 mm)0.51 mm737 mm35Fine detail: vinyl and paper only, weed with care
2.03 × 3 in (52 × 76 mm)0.76 mm1,105 mm15Fine detail: vinyl and paper only, weed with care
2.71 × 4 in (69 × 102 mm)1 mm1,473 mm8Vinyl, card and thin sheet
4.07 × 6 in (103 × 152 mm)1.5 mm2,210 mm2Vinyl, card and thin sheet
5.42 × 8 in (138 × 203 mm)2 mm2,946 mm2Vinyl, card and thin sheet
8.14 × 12 in (207 × 305 mm)3 mm4,420 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More pizza SVG files

← Pizza monogram frame All 13 pizzas Open pizza box →