Free pizza SVG

Pizza slice with pepperoni SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Pizza slice with pepperoni, as a solid black shape
Pizza slice with pepperoni. The preview is the SVG file itself.

A slice of pizza, point down: a fat rounded crust across the top, a wavy cut line where the cheese begins, four rounds of pepperoni cut out as holes and a few flecks of herb.

What is in the file

Size95 × 100 mm (3.73 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut12: 1 outer edge and 11 cut-outs
Cut length682 mm at this size
Narrowest part1 mm at this size
Nodes207 curve and line segments

Measured from the file. PNG: 1,900 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.95 × 1 in (24 × 25 mm)0.25 mm173 mm100Too fine for most machines
1.9 × 2 in (48 × 51 mm)0.51 mm346 mm25Fine detail: vinyl and paper only, weed with care
2.84 × 3 in (72 × 76 mm)0.76 mm520 mm12Fine detail: vinyl and paper only, weed with care
3.79 × 4 in (96 × 102 mm)1 mm693 mm6Vinyl, card and thin sheet
5.69 × 6 in (144 × 152 mm)1.5 mm1,039 mm2Vinyl, card and thin sheet
7.58 × 8 in (193 × 203 mm)2 mm1,386 mm1Vinyl, card and thin sheet
11.38 × 12 in (289 × 305 mm)3 mm2,079 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More pizza SVG files

← Layered pizza slice in four colours All 13 pizzas Whole pepperoni pizza →