Pinecone on a sprig of pine needles SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
A cone hanging from a twig with pairs of needles fanning out each side. The tip of every scale is marked with a small V-shaped slit, which is what makes the cone look layered while it stays one piece.
What is in the file
| Size | 100 × 79 mm (3.94 × 3.12 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 33: 1 outer edge and 32 cut-outs |
| Cut length | 1,298 mm at this size |
| Narrowest part | 1.6 mm at this size |
| Nodes | 386 curve and line segments |
Measured from the file. PNG: 2,000 × 1,600 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.79 in (25 × 20 mm) | 0.41 mm | 330 mm | 120 | Too fine for most machines |
| 2 × 1.58 in (51 × 40 mm) | 0.81 mm | 659 mm | 30 | Fine detail: vinyl and paper only, weed with care |
| 3 × 2.38 in (76 × 60 mm) | 1.2 mm | 989 mm | 12 | Vinyl, card and thin sheet |
| 4 × 3.17 in (102 × 80 mm) | 1.6 mm | 1,319 mm | 6 | Vinyl, card and thin sheet |
| 6 × 4.75 in (152 × 121 mm) | 2.4 mm | 1,978 mm | 2 | Vinyl, card and thin sheet |
| 8 × 6.34 in (203 × 161 mm) | 3.3 mm | 2,638 mm | 1 | Any material, including 3 mm wood and acrylic |
| 12 × 9.5 in (305 × 241 mm) | 4.9 mm | 3,956 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More pinecone SVG files
-
Single pinecone Solid · one piece -
Pair of pinecones with needles Solid · one piece -
Three pinecones tied with a bow Solid · one piece -
Long spruce pinecone Solid · one piece -
Pinecone gift tag stencil Solid · one piece -
Pine needle wreath with three pinecones Solid · one piece -
Pine bough with two pinecones Solid · one piece -
Crossed pine branches with a pinecone Solid · one piece
← Pinecone and needles in three colours All 12 pinecones Single pinecone →