Pinecone and needles in three colours SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
A dark brown cone hanging at a slant, a lighter crescent on the tip of each scale, and a green twig of needles running off to one side. Stack the crescents on the cone; the needles sit beside it.
What is in the file
| Size | 93 × 100 mm (3.67 × 3.94 in), scales to any size |
|---|---|
| Pieces | 33 separate pieces |
| Outlines to cut | 34: 33 outer edges and 1 cut-out |
| Cut length | 1,575 mm at this size |
| Narrowest part | Nothing narrower than 6 mm at this size |
| Nodes | 337 curve and line segments |
| Layers | 3: cone, scale tips and needles |
Measured from the file. PNG: 1,869 × 2,000 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 0.93 × 1 in (24 × 25 mm) | Over 1.5 mm | 400 mm | 100 | Vinyl, card and thin sheet |
| 1.86 × 2 in (47 × 51 mm) | Over 3 mm | 800 mm | 25 | Any material, including 3 mm wood and acrylic |
| 2.8 × 3 in (71 × 76 mm) | Over 4.6 mm | 1,200 mm | 12 | Any material, including 3 mm wood and acrylic |
| 3.73 × 4 in (95 × 102 mm) | Over 6.1 mm | 1,600 mm | 6 | Any material, including 3 mm wood and acrylic |
| 5.59 × 6 in (142 × 152 mm) | Over 9.1 mm | 2,400 mm | 2 | Any material, including 3 mm wood and acrylic |
| 7.46 × 8 in (189 × 203 mm) | Over 12 mm | 3,200 mm | 1 | Any material, including 3 mm wood and acrylic |
| 11.18 × 12 in (284 × 305 mm) | Over 18 mm | 4,801 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More pinecone SVG files
-
Pinecone on a sprig of pine needles Solid · one piece -
Single pinecone Solid · one piece -
Pair of pinecones with needles Solid · one piece -
Three pinecones tied with a bow Solid · one piece -
Long spruce pinecone Solid · one piece -
Pinecone gift tag stencil Solid · one piece -
Pine needle wreath with three pinecones Solid · one piece -
Pine bough with two pinecones Solid · one piece
← Pinecone outline All 12 pinecones Pinecone on a sprig of pine needles →