Free pineapple SVG

Split pineapple for a name SVG

Split pineapple for a name, as a solid black shape
Split pineapple for a name. The preview is the SVG file itself.

A lattice pineapple cut across the middle with a clear band between the halves for a name. It comes as two pieces: the top with the crown, and the bottom.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size56 × 100 mm (2.21 × 3.94 in), scales to any size
Pieces2 separate pieces
Outlines to cut22: 2 outer edges and 20 cut-outs
Cut length905 mm at this size
Narrowest part3.1 mm at this size
Nodes168 curve and line segments
SymmetryMirror

Measured from the file. PNG: 1,158 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.56 × 1 in (14 × 25 mm)0.79 mm230 mm160Fine detail: vinyl and paper only, weed with care
1.12 × 2 in (29 × 51 mm)1.6 mm460 mm45Vinyl, card and thin sheet
1.69 × 3 in (43 × 76 mm)2.4 mm690 mm18Vinyl, card and thin sheet
2.25 × 4 in (57 × 102 mm)3.1 mm919 mm8Any material, including 3 mm wood and acrylic
3.37 × 6 in (86 × 152 mm)4.7 mm1,379 mm3Any material, including 3 mm wood and acrylic
4.5 × 8 in (114 × 203 mm)6.3 mm1,839 mm2Any material, including 3 mm wood and acrylic
6.74 × 12 in (171 × 305 mm)9.4 mm2,758 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More pineapple SVG files

← Hollow pineapple for initials All 17 pineapples Pineapple with a heart →