Free pineapple SVG

Cute pineapple with a face SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Cute pineapple with a face, as a solid black shape
Cute pineapple with a face. The preview is the SVG file itself.

A plump pineapple with round eyes, rosy cheeks and a smile, a few diamond marks below and a short crown. For lunch boxes, stickers and summer party bags.

What is in the file

Size72 × 100 mm (2.84 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut11: 1 outer edge and 10 cut-outs
Cut length593 mm at this size
Narrowest part2.4 mm at this size
Nodes120 curve and line segments
SymmetryMirror

Measured from the file. PNG: 1,463 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.72 × 1 in (18 × 25 mm)0.61 mm151 mm130Fine detail: vinyl and paper only, weed with care
1.44 × 2 in (37 × 51 mm)1.2 mm301 mm35Vinyl, card and thin sheet
2.16 × 3 in (55 × 76 mm)1.8 mm452 mm15Vinyl, card and thin sheet
2.88 × 4 in (73 × 102 mm)2.4 mm602 mm6Vinyl, card and thin sheet
4.33 × 6 in (110 × 152 mm)3.7 mm904 mm2Any material, including 3 mm wood and acrylic
5.77 × 8 in (147 × 203 mm)4.9 mm1,205 mm2Any material, including 3 mm wood and acrylic
8.65 × 12 in (220 × 305 mm)7.3 mm1,807 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More pineapple SVG files

← Chevron pineapple All 17 pineapples Pineapple with sunglasses →