Free photographer SVG

Photographer camera on a tripod SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Photographer camera on a tripod, as a solid black shape
Photographer camera on a tripod. The preview is the SVG file itself.

A camera with a long lens and a hood, seen from the side on a tripod with a centre column, braces and a pan handle. The legs are about 3 mm wide at 100 mm tall, so cut it large.

What is in the file

Size56 × 100 mm (2.2 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut5: 1 outer edge and 4 cut-outs
Cut length596 mm at this size
Narrowest part1.9 mm at this size
Nodes102 curve and line segments

Measured from the file. PNG: 1,150 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.56 × 1 in (14 × 25 mm)0.48 mm151 mm160Too fine for most machines
1.12 × 2 in (28 × 51 mm)0.97 mm303 mm45Fine detail: vinyl and paper only, weed with care
1.67 × 3 in (43 × 76 mm)1.4 mm454 mm18Vinyl, card and thin sheet
2.23 × 4 in (57 × 102 mm)1.9 mm606 mm10Vinyl, card and thin sheet
3.35 × 6 in (85 × 152 mm)2.9 mm908 mm3Vinyl, card and thin sheet
4.46 × 8 in (113 × 203 mm)3.9 mm1,211 mm2Any material, including 3 mm wood and acrylic
6.7 × 12 in (170 × 305 mm)5.8 mm1,817 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More photographer SVG files

← Photographer behind the camera All 13 photographers Photographer softbox studio light →