Free photographer SVG

Photographer behind the camera SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Photographer behind the camera, as a solid black shape
Photographer behind the camera. The preview is the SVG file itself.

Head and shoulders with a top knot, both hands on a camera and the lens where the face would be. The lens ring is held by two small bridges, so the glass does not fall out.

What is in the file

Size94 × 100 mm (3.68 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut12: 1 outer edge and 11 cut-outs
Cut length734 mm at this size
Narrowest part2.8 mm at this size
Nodes95 curve and line segments

Measured from the file. PNG: 1,875 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.94 × 1 in (24 × 25 mm)0.71 mm186 mm100Fine detail: vinyl and paper only, weed with care
1.87 × 2 in (47 × 51 mm)1.4 mm373 mm25Vinyl, card and thin sheet
2.81 × 3 in (71 × 76 mm)2.1 mm559 mm12Vinyl, card and thin sheet
3.74 × 4 in (95 × 102 mm)2.8 mm746 mm6Vinyl, card and thin sheet
5.61 × 6 in (142 × 152 mm)4.3 mm1,119 mm2Any material, including 3 mm wood and acrylic
7.48 × 8 in (190 × 203 mm)5.7 mm1,491 mm1Any material, including 3 mm wood and acrylic
11.22 × 12 in (285 × 305 mm)8.5 mm2,237 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More photographer SVG files

← Photographer silhouette in the studio All 13 photographers Photographer camera on a tripod →