Free peacock SVG

Peacock tail fan SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Peacock tail fan, as a solid black shape
Peacock tail fan. The preview is the SVG file itself.

The fanned train on its own, thirteen feathers round a hub, with two rows of eyes and petal windows near the middle. A half-round shape for fans, shelf edges and card toppers.

What is in the file

Size100 × 60 mm (3.94 × 2.35 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut43: 1 outer edge and 42 cut-outs
Cut length1,686 mm at this size
Narrowest part1 mm at this size
Nodes791 curve and line segments
SymmetryMirror

Measured from the file. PNG: 2,000 × 1,227 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.6 in (25 × 15 mm)0.25 mm428 mm150Too fine for most machines
2 × 1.2 in (51 × 30 mm)0.51 mm856 mm40Fine detail: vinyl and paper only, weed with care
3 × 1.79 in (76 × 46 mm)0.76 mm1,285 mm18Fine detail: vinyl and paper only, weed with care
4 × 2.39 in (102 × 61 mm)1 mm1,713 mm8Vinyl, card and thin sheet
6 × 3.59 in (152 × 91 mm)1.5 mm2,569 mm3Vinyl, card and thin sheet
8 × 4.78 in (203 × 122 mm)2 mm3,426 mm2Vinyl, card and thin sheet
12 × 7.18 in (305 × 182 mm)3 mm5,139 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More peacock SVG files

← Peacock feather circle All 10 peacocks Peacock head with crest →