Free peacock SVG

Peacock head with crest SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Peacock head with crest, as a solid black shape
Peacock head with crest. The preview is the SVG file itself.

A peacock head and neck in profile with a crest of five paddle-tipped feathers, the pale marks above and below the eye cut as curves, and feather tips down the neck.

What is in the file

Size50 × 100 mm (1.96 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut7: 1 outer edge and 6 cut-outs
Cut length627 mm at this size
Narrowest part1 mm at this size
Nodes218 curve and line segments

Measured from the file. PNG: 1,035 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.5 × 1 in (13 × 25 mm)0.25 mm159 mm170Too fine for most machines
1 × 2 in (25 × 51 mm)0.51 mm319 mm50Fine detail: vinyl and paper only, weed with care
1.49 × 3 in (38 × 76 mm)0.76 mm478 mm21Fine detail: vinyl and paper only, weed with care
1.99 × 4 in (51 × 102 mm)1 mm637 mm10Vinyl, card and thin sheet
2.99 × 6 in (76 × 152 mm)1.5 mm956 mm3Vinyl, card and thin sheet
3.98 × 8 in (101 × 203 mm)2 mm1,274 mm2Vinyl, card and thin sheet
5.98 × 12 in (152 × 305 mm)3 mm1,911 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More peacock SVG files

← Peacock tail fan All 10 peacocks Peacock outline →