Free paw print SVG

Cat paw outline SVG

Cat paw outline, drawn as a line — Cat paw outline. The preview is the SVG file itself.

The cat print as five outlined pads, each line 2.2 mm wide. A light mark for a collar tag, a vet card or the corner of a photo.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 81 mm (3.94 × 3.17 in), scales to any size
Pieces	5 separate pieces
Outlines to cut	10: 5 outer edges and 5 cut-outs
Cut length	863 mm at this size
Narrowest part	2.3 mm at this size
Nodes	115 curve and line segments
Symmetry	Mirror

Measured from the file. PNG: 2,000 × 1,625 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.81 in (25 × 20 mm)	0.58 mm	219 mm	120	Fine detail: vinyl and paper only, weed with care
2 × 1.61 in (51 × 41 mm)	1.2 mm	438 mm	30	Vinyl, card and thin sheet
3 × 2.42 in (76 × 61 mm)	1.8 mm	658 mm	12	Vinyl, card and thin sheet
4 × 3.22 in (102 × 82 mm)	2.3 mm	877 mm	6	Vinyl, card and thin sheet
6 × 4.83 in (152 × 123 mm)	3.5 mm	1,315 mm	2	Any material, including 3 mm wood and acrylic
8 × 6.44 in (203 × 164 mm)	4.7 mm	1,754 mm	1	Any material, including 3 mm wood and acrylic
12 × 9.66 in (305 × 245 mm)	7 mm	2,630 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More paw print SVG files

← Paw print outline All 16 paw prints Paw print with a heart →