Free paw print SVG

Heart with a paw print cut out SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Heart with a paw print cut out, as a solid black shape
Heart with a paw print cut out. The preview is the SVG file itself.

A solid heart with a dog print cut out of its middle. All one piece, because the paw is the hole: the right choice for wood, acrylic, leather and stencils.

What is in the file

Size100 × 90 mm (3.94 × 3.56 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut6: 1 outer edge and 5 cut-outs
Cut length574 mm at this size
Narrowest part1.4 mm at this size
Nodes68 curve and line segments
SymmetryMirror

Measured from the file. PNG: 2,000 × 1,815 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.9 in (25 × 23 mm)0.36 mm146 mm110Too fine for most machines
2 × 1.81 in (51 × 46 mm)0.71 mm292 mm30Fine detail: vinyl and paper only, weed with care
3 × 2.71 in (76 × 69 mm)1.1 mm437 mm12Vinyl, card and thin sheet
4 × 3.62 in (102 × 92 mm)1.4 mm583 mm6Vinyl, card and thin sheet
6 × 5.42 in (152 × 138 mm)2.1 mm875 mm2Vinyl, card and thin sheet
8 × 7.23 in (203 × 184 mm)2.8 mm1,166 mm1Vinyl, card and thin sheet
12 × 10.85 in (305 × 276 mm)4.3 mm1,750 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More paw print SVG files

← Paw print with a heart pad All 16 paw prints Paw print ornament →