Free Oh Boy SVG

Oh Boy in Alfa Slab One SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Oh Boy in Alfa Slab One, as a solid black shape
Oh Boy in Alfa Slab One. The preview is the SVG file itself.

“Oh Boy” set in Alfa Slab One, a very heavy slab serif, on 2 centred lines. Thick strokes and blunt square serifs give it the weight of a poster headline.

What is in the file

Size91 × 100 mm (3.57 × 3.94 in), scales to any size
Pieces5 separate pieces
Outlines to cut9: 5 outer edges and 4 cut-outs
Cut length800 mm at this size
Narrowest part4.7 mm at this size
Nodes121 curve and line segments

Measured from the file. PNG: 1,819 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.91 × 1 in (23 × 25 mm)1.2 mm203 mm110Vinyl, card and thin sheet
1.81 × 2 in (46 × 51 mm)2.4 mm406 mm30Vinyl, card and thin sheet
2.72 × 3 in (69 × 76 mm)3.6 mm610 mm12Any material, including 3 mm wood and acrylic
3.62 × 4 in (92 × 102 mm)4.8 mm813 mm6Any material, including 3 mm wood and acrylic
5.44 × 6 in (138 × 152 mm)7.2 mm1,219 mm2Any material, including 3 mm wood and acrylic
7.25 × 8 in (184 × 203 mm)9.6 mm1,626 mm1Any material, including 3 mm wood and acrylic
10.87 × 12 in (276 × 305 mm)14 mm2,438 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Oh Boy SVG files

← Oh Boy in Lilita One All 13 Oh Boy designs Oh Boy in Amatic SC →