Free Oh Boy SVG

Oh Boy in Amatic SC SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Oh Boy in Amatic SC, as a solid black shape
Oh Boy in Amatic SC. The preview is the SVG file itself.

“Oh Boy” set in Amatic SC, narrow hand-drawn capitals, on 2 centred lines. Tall, thin and slightly uneven, like lettering on a chalkboard; the strokes are thickened so they cut.

What is in the file

Size42 × 100 mm (1.63 × 3.94 in), scales to any size
Pieces5 separate pieces
Outlines to cut9: 5 outer edges and 4 cut-outs
Cut length769 mm at this size
Narrowest part1.5 mm at this size
Nodes196 curve and line segments

Measured from the file. PNG: 875 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.42 × 1 in (11 × 25 mm)0.38 mm195 mm190Too fine for most machines
0.83 × 2 in (21 × 51 mm)0.76 mm391 mm55Fine detail: vinyl and paper only, weed with care
1.24 × 3 in (32 × 76 mm)1.1 mm586 mm24Vinyl, card and thin sheet
1.66 × 4 in (42 × 102 mm)1.5 mm781 mm12Vinyl, card and thin sheet
2.49 × 6 in (63 × 152 mm)2.3 mm1,172 mm4Vinyl, card and thin sheet
3.32 × 8 in (84 × 203 mm)3 mm1,563 mm3Any material, including 3 mm wood and acrylic
4.98 × 12 in (126 × 305 mm)4.6 mm2,344 mm2Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Oh Boy SVG files

← Oh Boy in Alfa Slab One All 13 Oh Boy designs Oh Boy in block capitals →