Free Oh Boy SVG

Oh Boy with a pair of baby feet SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Oh Boy with a pair of baby feet, as a solid black shape
Oh Boy with a pair of baby feet. The preview is the SVG file itself.

“Oh Boy” with a pair of baby feet above the words: the first line in Pacifico script, the rest in narrow capitals, the lines made the same width. The picture is a separate piece, so it can be cut in a second colour or left off.

What is in the file

Size49 × 100 mm (1.92 × 3.94 in), scales to any size
Pieces17 separate pieces
Outlines to cut22: 17 outer edges and 5 cut-outs
Cut length898 mm at this size
Narrowest part1.9 mm at this size
Nodes180 curve and line segments

Measured from the file. PNG: 1,013 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.49 × 1 in (12 × 25 mm)0.48 mm228 mm170Too fine for most machines
0.97 × 2 in (25 × 51 mm)0.97 mm456 mm50Fine detail: vinyl and paper only, weed with care
1.46 × 3 in (37 × 76 mm)1.4 mm684 mm21Vinyl, card and thin sheet
1.95 × 4 in (49 × 102 mm)1.9 mm912 mm10Vinyl, card and thin sheet
2.92 × 6 in (74 × 152 mm)2.9 mm1,369 mm3Vinyl, card and thin sheet
3.9 × 8 in (99 × 203 mm)3.9 mm1,825 mm2Any material, including 3 mm wood and acrylic
5.84 × 12 in (148 × 305 mm)5.8 mm2,737 mm2Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Oh Boy SVG files

← Oh Boy with a drop shadow All 13 Oh Boy designs Oh Boy in Pacifico →