Free North Pole SVG

North Pole stencil plate SVG

North Pole stencil plate, as a solid black shape — North Pole stencil plate. The preview is the SVG file itself.

A rounded plate with “NORTH POLE” cut through it in block capitals, every closed letter bridged so nothing drops out. One piece: tape it down and paint or spray through it.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 85 mm (3.94 × 3.35 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	10: 1 outer edge and 9 cut-outs
Cut length	1,432 mm at this size
Narrowest part	1.7 mm at this size
Nodes	212 curve and line segments

Measured from the file. PNG: 2,000 × 1,712 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.85 in (25 × 22 mm)	0.43 mm	364 mm	110	Too fine for most machines
2 × 1.7 in (51 × 43 mm)	0.86 mm	727 mm	30	Fine detail: vinyl and paper only, weed with care
3 × 2.55 in (76 × 65 mm)	1.3 mm	1,091 mm	12	Vinyl, card and thin sheet
4 × 3.4 in (102 × 86 mm)	1.7 mm	1,455 mm	6	Vinyl, card and thin sheet
6 × 5.1 in (152 × 130 mm)	2.6 mm	2,182 mm	2	Vinyl, card and thin sheet
8 × 6.8 in (203 × 173 mm)	3.5 mm	2,910 mm	1	Any material, including 3 mm wood and acrylic
12 × 10.2 in (305 × 259 mm)	5.2 mm	4,365 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More North Pole SVG files

← North Pole outline lettering All 12 North Pole designs North Pole with a drop shadow →