Free North Pole SVG

North Pole with a drop shadow SVG

North Pole with a drop shadow, in layered colours
North Pole with a drop shadow. The preview is the SVG file itself.

“North Pole” in Pacifico script in two colours: the words, and a thicker copy behind them shifted down and to the right as a shadow. The shadow layer is one solid piece, which makes the whole design easy to place.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size100 × 96 mm (3.94 × 3.76 in), scales to any size
Pieces5 separate pieces
Outlines to cut22: 5 outer edges and 17 cut-outs
Cut length1,879 mm at this size
Narrowest part1.1 mm at this size
Nodes541 curve and line segments
Layers2: shadow and words

Measured from the file. PNG: 2,000 × 1,915 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.96 in (25 × 24 mm)0.28 mm477 mm100Too fine for most machines
2 × 1.91 in (51 × 49 mm)0.56 mm955 mm25Fine detail: vinyl and paper only, weed with care
3 × 2.87 in (76 × 73 mm)0.84 mm1,432 mm9Fine detail: vinyl and paper only, weed with care
4 × 3.82 in (102 × 97 mm)1.1 mm1,909 mm6Vinyl, card and thin sheet
6 × 5.74 in (152 × 146 mm)1.7 mm2,864 mm2Vinyl, card and thin sheet
8 × 7.65 in (203 × 194 mm)2.2 mm3,818 mm1Vinyl, card and thin sheet
12 × 11.47 in (305 × 291 mm)3.4 mm5,727 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More North Pole SVG files

← North Pole stencil plate All 12 North Pole designs North Pole in Pacifico →