Split North Carolina for a name SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
North Carolina divided by a clear band 18 mm tall across its broadest part, for a family name, a town or a date set between the two halves. The halves of North Carolina are loose pieces: line them up with transfer tape.
What is in the file
| Size | 100 × 51 mm (3.94 × 2 in), scales to any size |
|---|---|
| Pieces | 2 separate pieces |
| Outlines to cut | 2 outlines |
| Cut length | 305 mm at this size |
| Narrowest part | 2.1 mm at this size |
| Nodes | 75 curve and line segments |
Measured from the file. PNG: 2,000 × 1,052 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.51 in (25 × 13 mm) | 0.53 mm | 77 mm | 170 | Fine detail: vinyl and paper only, weed with care |
| 2 × 1.01 in (51 × 26 mm) | 1.1 mm | 155 mm | 50 | Vinyl, card and thin sheet |
| 3 × 1.52 in (76 × 39 mm) | 1.6 mm | 232 mm | 21 | Vinyl, card and thin sheet |
| 4 × 2.03 in (102 × 52 mm) | 2.1 mm | 310 mm | 10 | Vinyl, card and thin sheet |
| 6 × 3.04 in (152 × 77 mm) | 3.2 mm | 465 mm | 3 | Any material, including 3 mm wood and acrylic |
| 8 × 4.06 in (203 × 103 mm) | 4.3 mm | 620 mm | 2 | Any material, including 3 mm wood and acrylic |
| 12 × 6.08 in (305 × 155 mm) | 6.4 mm | 930 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More North Carolina SVG files
-
North Carolina in stripes Solid · 5 pieces
-
Layered North Carolina on a hexagon Layered · 2 pieces
-
North Carolina state silhouette Solid · one piece
-
North Carolina state outline Outline · one piece
-
North Carolina with a heart cut out Solid · one piece
-
North Carolina cut from a disc Solid · one piece
-
North Carolina cut from a square tile Solid · one piece
-
North Carolina cut from a heart Solid · one piece
← North Carolina with its name beneath All 10 North Carolina designs North Carolina in stripes →