North Carolina with a heart cut out SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
The solid state with a heart 23 mm wide cut out of it, placed where North Carolina is broadest so that the heart is as large as the state allows.
What is in the file
| Size | 100 × 38 mm (3.94 × 1.5 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 2: 1 outer edge and 1 cut-out |
| Cut length | 350 mm at this size |
| Narrowest part | Nothing narrower than 6 mm at this size |
| Nodes | 173 curve and line segments |
Measured from the file. PNG: 2,000 × 812 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.38 in (25 × 10 mm) | Over 1.5 mm | 89 mm | 200 | Vinyl, card and thin sheet |
| 2 × 0.76 in (51 × 19 mm) | Over 3 mm | 178 mm | 60 | Any material, including 3 mm wood and acrylic |
| 3 × 1.15 in (76 × 29 mm) | Over 4.6 mm | 267 mm | 27 | Any material, including 3 mm wood and acrylic |
| 4 × 1.53 in (102 × 39 mm) | Over 6.1 mm | 356 mm | 14 | Any material, including 3 mm wood and acrylic |
| 6 × 2.29 in (152 × 58 mm) | Over 9.1 mm | 533 mm | 4 | Any material, including 3 mm wood and acrylic |
| 8 × 3.06 in (203 × 78 mm) | Over 12 mm | 711 mm | 3 | Any material, including 3 mm wood and acrylic |
| 12 × 4.58 in (305 × 116 mm) | Over 18 mm | 1,067 mm | 2 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More North Carolina SVG files
-
North Carolina cut from a disc Solid · one piece
-
North Carolina cut from a square tile Solid · one piece
-
North Carolina cut from a heart Solid · one piece
-
North Carolina with its name beneath Solid · 14 pieces
-
Split North Carolina for a name Solid · 2 pieces
-
North Carolina in stripes Solid · 5 pieces
-
Layered North Carolina on a hexagon Layered · 2 pieces
-
North Carolina state silhouette Solid · one piece
← North Carolina state outline All 10 North Carolina designs North Carolina cut from a disc →