Free North Carolina SVG

North Carolina with its name beneath SVG

North Carolina with its name beneath, as a solid black shape — North Carolina with its name beneath. The preview is the SVG file itself.

The solid state with “NORTH CAROLINA” in narrow capitals under it. The letters of “North Carolina” are loose pieces, so use transfer tape to keep their spacing.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 58 mm (3.94 × 2.28 in), scales to any size
Pieces	14 separate pieces
Outlines to cut	20: 14 outer edges and 6 cut-outs
Cut length	938 mm at this size
Narrowest part	1.9 mm at this size
Nodes	403 curve and line segments

Measured from the file. PNG: 2,000 × 1,190 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.58 in (25 × 15 mm)	0.48 mm	238 mm	150	Too fine for most machines
2 × 1.16 in (51 × 29 mm)	0.97 mm	477 mm	40	Fine detail: vinyl and paper only, weed with care
3 × 1.74 in (76 × 44 mm)	1.4 mm	715 mm	18	Vinyl, card and thin sheet
4 × 2.32 in (102 × 59 mm)	1.9 mm	953 mm	8	Vinyl, card and thin sheet
6 × 3.47 in (152 × 88 mm)	2.9 mm	1,430 mm	3	Vinyl, card and thin sheet
8 × 4.63 in (203 × 118 mm)	3.9 mm	1,906 mm	2	Any material, including 3 mm wood and acrylic
12 × 6.95 in (305 × 176 mm)	5.8 mm	2,859 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More North Carolina SVG files

← North Carolina cut from a heart All 10 North Carolina designs Split North Carolina for a name →