Free Nana SVG

Nana stencil plate SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Nana stencil plate, as a solid black shape
Nana stencil plate. The preview is the SVG file itself.

A rounded plate with “NANA” cut through it in block capitals, every closed letter bridged so nothing drops out. One piece: tape it down and paint or spray through it.

What is in the file

Size100 × 47 mm (3.94 × 1.87 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut5: 1 outer edge and 4 cut-outs
Cut length882 mm at this size
Narrowest part1.7 mm at this size
Nodes113 curve and line segments

Measured from the file. PNG: 2,000 × 988 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.47 in (25 × 12 mm)0.43 mm224 mm180Too fine for most machines
2 × 0.95 in (51 × 24 mm)0.86 mm448 mm50Fine detail: vinyl and paper only, weed with care
3 × 1.42 in (76 × 36 mm)1.3 mm672 mm21Vinyl, card and thin sheet
4 × 1.9 in (102 × 48 mm)1.7 mm896 mm10Vinyl, card and thin sheet
6 × 2.84 in (152 × 72 mm)2.6 mm1,344 mm4Vinyl, card and thin sheet
8 × 3.79 in (203 × 96 mm)3.5 mm1,792 mm3Any material, including 3 mm wood and acrylic
12 × 5.69 in (305 × 144 mm)5.2 mm2,688 mm2Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Nana SVG files

← Nana outline lettering All 13 Nana designs Nana with a drop shadow →