Free Nana SVG

Nana in Alfa Slab One SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Nana in Alfa Slab One, as a solid black shape
Nana in Alfa Slab One. The preview is the SVG file itself.

“Nana” set in Alfa Slab One, a very heavy slab serif. Thick strokes and blunt square serifs give it the weight of a poster headline.

What is in the file

Size100 × 28 mm (3.94 × 1.1 in), scales to any size
Pieces4 separate pieces
Outlines to cut6: 4 outer edges and 2 cut-outs
Cut length510 mm at this size
Narrowest part3.4 mm at this size
Nodes96 curve and line segments

Measured from the file. PNG: 2,000 × 613 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.28 in (25 × 7 mm)0.86 mm130 mm250Fine detail: vinyl and paper only, weed with care
2 × 0.56 in (51 × 14 mm)1.7 mm259 mm80Vinyl, card and thin sheet
3 × 0.84 in (76 × 21 mm)2.6 mm389 mm33Vinyl, card and thin sheet
4 × 1.12 in (102 × 28 mm)3.5 mm518 mm18Any material, including 3 mm wood and acrylic
6 × 1.67 in (152 × 43 mm)5.2 mm777 mm6Any material, including 3 mm wood and acrylic
8 × 2.23 in (203 × 57 mm)6.9 mm1,036 mm5Any material, including 3 mm wood and acrylic
12 × 3.35 in (305 × 85 mm)10 mm1,554 mm3Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Nana SVG files

← Nana in Lilita One All 13 Nana designs Nana in Amatic SC →