Free Nana SVG

Nana with a drop shadow SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Nana with a drop shadow, in layered colours
Nana with a drop shadow. The preview is the SVG file itself.

“Nana” in Pacifico script in two colours: the words, and a thicker copy behind them shifted down and to the right as a shadow. The shadow layer is one solid piece, which makes the whole design easy to place.

What is in the file

Size100 × 37 mm (3.94 × 1.44 in), scales to any size
Pieces2 separate pieces
Outlines to cut6: 2 outer edges and 4 cut-outs
Cut length949 mm at this size
Narrowest part6 mm at this size
Nodes230 curve and line segments
Layers2: shadow and words

Measured from the file. PNG: 2,000 × 783 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.37 in (25 × 9 mm)1.5 mm241 mm210Vinyl, card and thin sheet
2 × 0.73 in (51 × 19 mm)3 mm482 mm65Any material, including 3 mm wood and acrylic
3 × 1.1 in (76 × 28 mm)4.6 mm723 mm27Any material, including 3 mm wood and acrylic
4 × 1.47 in (102 × 37 mm)6.1 mm964 mm14Any material, including 3 mm wood and acrylic
6 × 2.2 in (152 × 56 mm)9.1 mm1,446 mm5Any material, including 3 mm wood and acrylic
8 × 2.94 in (203 × 75 mm)12 mm1,928 mm3Any material, including 3 mm wood and acrylic
12 × 4.4 in (305 × 112 mm)18 mm2,893 mm2Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Nana SVG files

← Nana stencil plate All 13 Nana designs Nana with a heart →