Free motorcycle SVG

Motorcycle helmet SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Motorcycle helmet, as a solid black shape
Motorcycle helmet. The preview is the SVG file itself.

A full-face helmet from the side, facing right: an open visor with a glint across it, two racing stripes over the crown, chin vents and a pivot.

What is in the file

Size100 × 97 mm (3.94 × 3.82 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut9: 1 outer edge and 8 cut-outs
Cut length993 mm at this size
Narrowest part3.7 mm at this size
Nodes97 curve and line segments

Measured from the file. PNG: 2,000 × 1,944 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.97 in (25 × 25 mm)0.94 mm252 mm100Fine detail: vinyl and paper only, weed with care
2 × 1.94 in (51 × 49 mm)1.9 mm504 mm25Vinyl, card and thin sheet
3 × 2.91 in (76 × 74 mm)2.8 mm757 mm9Vinyl, card and thin sheet
4 × 3.88 in (102 × 99 mm)3.8 mm1,009 mm4Any material, including 3 mm wood and acrylic
6 × 5.83 in (152 × 148 mm)5.6 mm1,513 mm2Any material, including 3 mm wood and acrylic
8 × 7.77 in (203 × 197 mm)7.5 mm2,018 mm1Any material, including 3 mm wood and acrylic
12 × 11.65 in (305 × 296 mm)11 mm3,027 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More motorcycle SVG files

← Motorcycle engine, a V-twin All 13 motorcycles Motorcycle wheel with wings →