Free motorcycle SVG

Biker riding a motorcycle SVG

Biker riding a motorcycle, as a solid black shape
Biker riding a motorcycle. The preview is the SVG file itself.

A rider in a helmet sitting back on the cruiser, one hand on the bars and a boot on the footrest. Rider and machine are welded into one piece.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size100 × 75 mm (3.94 × 2.95 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut35: 1 outer edge and 34 cut-outs
Cut length1,151 mm at this size
Narrowest part2 mm at this size
Nodes336 curve and line segments

Measured from the file. PNG: 2,000 × 1,517 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.75 in (25 × 19 mm)0.51 mm292 mm120Fine detail: vinyl and paper only, weed with care
2 × 1.5 in (51 × 38 mm)1 mm585 mm35Vinyl, card and thin sheet
3 × 2.25 in (76 × 57 mm)1.5 mm877 mm12Vinyl, card and thin sheet
4 × 3 in (102 × 76 mm)2 mm1,169 mm6Vinyl, card and thin sheet
6 × 4.49 in (152 × 114 mm)3 mm1,754 mm2Any material, including 3 mm wood and acrylic
8 × 5.99 in (203 × 152 mm)4.1 mm2,339 mm1Any material, including 3 mm wood and acrylic
12 × 8.99 in (305 × 228 mm)6.1 mm3,508 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More motorcycle SVG files

← Bobber motorcycle All 13 motorcycles Dirt bike motorcycle →