Free Mother of the Bride SVG

Mother of the Bride in Lobster SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Mother of the Bride in Lobster, as a solid black shape
Mother of the Bride in Lobster. The preview is the SVG file itself.

“Mother of the Bride” set in Lobster, a bold upright script, on 2 centred lines. Upright and heavy, it stays readable from across a room and weeds easily.

What is in the file

Size100 × 59 mm (3.94 × 2.31 in), scales to any size
Pieces8 separate pieces
Outlines to cut15: 8 outer edges and 7 cut-outs
Cut length1,196 mm at this size
Narrowest part0.8 mm at this size
Nodes325 curve and line segments

Measured from the file. PNG: 2,000 × 1,206 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.59 in (25 × 15 mm)0.2 mm304 mm150Too fine for most machines
2 × 1.17 in (51 × 30 mm)0.41 mm608 mm40Too fine for most machines
3 × 1.76 in (76 × 45 mm)0.61 mm911 mm18Fine detail: vinyl and paper only, weed with care
4 × 2.35 in (102 × 60 mm)0.81 mm1,215 mm8Fine detail: vinyl and paper only, weed with care
6 × 3.52 in (152 × 89 mm)1.2 mm1,823 mm3Vinyl, card and thin sheet
8 × 4.7 in (203 × 119 mm)1.6 mm2,430 mm2Vinyl, card and thin sheet
12 × 7.04 in (305 × 179 mm)2.4 mm3,645 mm1Vinyl, card and thin sheet

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Mother of the Bride SVG files

← Mother of the Bride in Pacifico All 13 Mother of the Bride designs Mother of the Bride in Kaushan Script →