Free Mother of the Bride SVG

Mother of the Bride in Alfa Slab One SVG

Mother of the Bride in Alfa Slab One, as a solid black shape
Mother of the Bride in Alfa Slab One. The preview is the SVG file itself.

“Mother of the Bride” set in Alfa Slab One, a very heavy slab serif, on 2 centred lines. Thick strokes and blunt square serifs give it the weight of a poster headline.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size100 × 37 mm (3.94 × 1.46 in), scales to any size
Pieces17 separate pieces
Outlines to cut25: 17 outer edges and 8 cut-outs
Cut length920 mm at this size
Narrowest part2 mm at this size
Nodes496 curve and line segments

Measured from the file. PNG: 2,000 × 792 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.37 in (25 × 9 mm)0.51 mm234 mm210Fine detail: vinyl and paper only, weed with care
2 × 0.74 in (51 × 19 mm)1 mm467 mm60Vinyl, card and thin sheet
3 × 1.12 in (76 × 28 mm)1.5 mm701 mm27Vinyl, card and thin sheet
4 × 1.49 in (102 × 38 mm)2 mm935 mm14Vinyl, card and thin sheet
6 × 2.23 in (152 × 57 mm)3 mm1,402 mm5Any material, including 3 mm wood and acrylic
8 × 2.98 in (203 × 76 mm)4.1 mm1,869 mm3Any material, including 3 mm wood and acrylic
12 × 4.46 in (305 × 113 mm)6.1 mm2,804 mm2Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Mother of the Bride SVG files

← Mother of the Bride in Lilita One All 12 Mother of the Bride designs Mother of the Bride in Amatic SC →